Dual Grit Round Whetstone H1055

Product: Double Sided Combination Round Whetstone Model Number: H1055

More details

H1055

Product:
Double Sided Combination Round Whetstone


Model Number:
H1055

 
Description:

Double Sided Combination Round Whetstones H1055

Stones Measure:Φ76*26mm.

Grit: Coarse Grit&Medium Grit

Material: Brown Corundum(Aluminum Oxide)

The Combination Whetstones offers two grit sizes per stone for a more economical choice in waterstones. With the purchase of just two stones you can have a coarse grit stone all the way up to the extremely medium grit stone. The stones are large enough for just about any knives and tools. This stone comes mounted on a soft silica gel base that features a built-in stone storage area in the bottom for the Stone. These whetstones are available in 120/240, 120/320,240/800, 400/1000, 600/1000,600/2000,1000/3000,2000/5000,and 3000/8000 grit. A colour box packing is included with each stone.

 


FEATURES:


 ●Coarse grit for coarse sharpening and polish

 ●Medium grit for fine sharpening and final polish

 ●Multi-purpose stone sharpener is portable and versatile

 ●Idea for sharpening kitchen knives,sports knives,fishing knives,pocket knives,lawn mower blades,machetes,hatchets,axe baldes,shovels , spades,ad other cutting and chopping tools and more

 ● Easy to grip and storage,contoured shape provides for safe,simple sharpening

 


MANUAL INSTRUCTIONS

Submerge the whetstone in water for approximately 5 minutes; then remove it from the water and place it on the support. This operation must always be repeated whenever the whetstone has not been used for a period exceeding two days. Place the unit on a flat surface that does not move during use. Always keep the surface of the whetstone wet while sharpening. Choose one of the available grains, depending on the condition of the edge.
Coarse Grain : Initial cutting edge sharpener aimed at knife edges that are very worn or damaged.
Fine Grain :Finishing sharpener aimed at the removal of burrs so as to make the cutting edge smoother.
Position the knife edge over the whetstone, maintaining an angle of 15-30° between the blade and the whetstone’s surface .Move the blade forward diagonally across the whetstone’s surface and, on the return movement, turn the blade to sharpen the opposite edge. To provide more stability and precision during the sharpening procedure, gently press the face of the knife with the fingers of your free hand. In general, always begin sharpening using the coarse grain,followed by the finishing process using the fine grain, taking care to invert the position of the sharpener on the support.After using, please clean the surface of the whetstone with a soft brush and leave it to dry in a well ventilated area. To clean the knife, use a soft sponge, water and gentle or neutral detergent after sharpening. Dry carefully.

 

CAUTION
Do not use the whetstone to sharpen serrated blades or scissors. To avoid knife damage, sharpen it by employing light pressure. Use the entire surface of the stone, so as to maintain evenness during sharpening. Avoid letting the whetstone fall and try to prevent other similar impacts.Being associated to the use of knives, keep the whetstone out of the reach of children

26 other products in the same category: